单加热输出或加热/冷却双输出。人机界面4按键操作，两个4位10mm和8mmLED显示，
可选择颜色（红色/红色、红色/绿色、绿色/红色、绿色/绿色），5个LED指示灯。自动/
手动从前面板选择，无扰动切换。计算机组态支持计算机组态（无需通讯选件）。组态
软件适用于Windows 98及以上。输出配置Zui多3个输出，用于控制、报警、24VDC变送电
源或转发过程值或设定点。报警类型过程高/低报警、设定值偏差报警、带报警、逻辑”
与”/”或”报警。1路回路报警用于过程控制安全。过程报警滞后可调。控制类型PID
控制，带预整定、自整定、手动整定或ON/OFF控制功能。
Single heating output or dual heating/cooling output. HMI 4-buttonoperation, two 4-bit 10mm and 8mm LED displays,
color choices (red/red, red/green, green/red, green/green) , 5 LEDindicators. Auto/
Manually select from front panel, no switching. Computerconfiguration supports computer configuration (no communicationoptions are required) . Configuration
Software for Windows 98 and above. Output configuration up to 3outputs for control, alarm, 24V DC power transmission
Source or forward procedure values or set points. Alarm typeprocess high/low alarm, set error alarm, with alarm,logic”
With”/” or” alarm. 1 circuit alarm for process control safety.Process alarm delay adjustable. Control Type PID
Control with pre-set, self-set, manual set or ON/OFFcontrol.
