华为r4850s整流模块、

华为r4850s通信整流模块

1、PAC-2700WA电源在Ⅵ1R1/1R2/1R3版本应用请注意以下事项

(1)与PAC-2700WA混插按照30:27均流

(2)软件界面显示2700W

(3)支持和2700W软件互相加载。

3.PAC2700WA电源混插。

4、PAC2700WA电源

可靠性影响

电源/功耗影响

量影响

供应华为PAC2700WA2700W交流电源。主设备

基本配置

CE-RACK-A01FR42812交流总装机柜(800×1200×2000mm)

CE12804-ACCE12804交流总装机箱(含满配监控板和风机盒)

CE12808-ACCE12808交流总装机箱(含满配监控板和风机盒)

CE12812ACCE12812交流总装机箱(含满配监控板和风机盒)

CE12816ACCE12816交流总装机箱(含满配监控板和风机盒)

CE12804DCCE12804直流总装机箱(含满配监控板和风机盒)

CE12808-DCCE12808直流总装机箱(含满配监控板和风机盒)

CE12812-DCCE12812直流总装机箱(含满配监控板和风机盒

E12816-DCCE12816直流总装机箱(含满配监控板和风机盒)

电源

PAC-2700WA2700W交流电源

PDC2200WA2200W直流电源

华为电源模块说明

在V200R002C50之前版本中,当设备的单板互通模式为增强模式时,CE-FWA和 CE-IPSA单板不能和FD/FDA系列接口板混插。

在∨200R002C50及之后版本中,当设备的单板互通模式为增强模式时,可以执行命令 set forward capability compatible fw-lpu,配置 CE-FWA和CE-PSA单板

可以和FD/FD1/ FDA/FG/FG1系列接口板混插。

EA、EC、EC1、ED、EF、EG、MC、MC1、MD系列单板和FD、FD1、FDA、FG、FG1系列单板不建议插在同一机框上使用

的不同,CE12804/CE12808/CE12812/CE12816/CE12804S/CE12808S交换机支持的单板可分为主控板、交换网板、监控板、接口板(或称业务板、线

卡)、塇值业务板,如表1所示。

其中,对于接口板来说,按照单板性能、表项大小的不同,单板的名称也有所不同,可分为EA、EC、EC1、ED、EF、EG、BA、FD、FD1、FDA、FG、FG1、M

C、MC1、MD系列

Huawei r4850s details

1. The application of PAC-2700WA power supply in version VI 1R1/1R2/1R3 should pay attention to the following points

(1) Interpolation with PAC-2700WA at 30:27 current sharing

(2) Software interface display 2700W

(3) Support and 2700W software load each other.

3. PAC2700WA power mixing.

4. PAC2700WA Power Supply。

   本公司专业致力于华为、艾默生、中兴通信电源模块的研究，为客户提供全程一站式服务，我公司可以根据客户的具体特点和需求量身定做不同型号的通信电源，具体包括设计--选型--安装等跟踪指导，客户的需求就是我们的工作，做各类通信电源模块我们更专业。

Huawei r4850s rectifier module of communication

1, 2700 wa power in Ⅵ PAC - 1 r1 / r2 / r3 version 1 application please note that the following matters

(1) with PAC - 2700 wa mixed interpolation according to 17: s15-39 flow

(2) software interface display 2700 w

(3) support and 2700 w software loaded with each other.

3. PAC2700WA power mix.

4, PAC2700WA power supply

Reliability influence

The power/power consumption

Amount of influence

Huawei PAC2700WA2700W ac power supply. The main equipment

The basic configuration

CE - RACK - A01FR42812 exchange assembly cabinet (800 * 1200 * 2000 mm)

CE12804 - ACCE12804 exchange assembly chassis (including full match monitoring plate and fan box)

CE12808 - ACCE12808 exchange assembly chassis (including full match monitoring plate and fan box)

CE12812ACCE12812 exchange assembly chassis (including full match monitoring plate and fan box)

CE12816ACCE12816 exchange assembly chassis (including full match monitoring plate and fan box)

CE12804DCCE12804 dc assembly chassis (including full monitoring plate and fan box)

CE12808 - DCCE12808 dc assembly chassis (including full monitoring plate and fan box)

CE12812 - DCCE12812 dc assembly chassis (including full monitoring plate and fan box

E12816 - DCCE12816 dc assembly chassis (including full monitoring plate and fan box)

The power supply

The PAC - 2700 wa2700w ac power

PDC2200WA2200W dc power supply

Huawei power module

Before V200R002C50 version, when the veneer of equipment communication mode to enhance, CE - FWA and CE - IPSA veneer cannot and FD/FDA series interface board mix.

After ∨ 200 r002c50 and version, when the device of the single communication mode to enhance mode, you can execute the command set forward capability compatible fw - lpu, configuration of CE - FWA and CE - PSA veneer

Can and FD/FD1 / FDA/FG/FG1 series interface board mix.

EA, EC, EC1, ED, EF, EG, MC, MC1, MD series of veneer and FD, FD1, FDA, FG, FG1 series veneer at the same time put on the same machine frame is not recommended to use

Different, CE12804 / CE12808 / CE12812 / CE12816 CE12804S/CE12808S switches support exchange of veneer can be divided into the main control board, sheet, monitoring board, interface board, plate, wire or business